If you want to make the life of the induction heating equipment longer, it should be used correctly. Strictly implement the guidelines of first water supply and then electricity supply. Water shortage is prohibited during the operation. The quality and pressure of the cooling water inside the equipment and the sensor Necessary to reach the requirements. In order to avoid blocking the cooling pipeline, if you choose a water pump to supply water, install a filter at the water pump inlet. The cooling water temperature cannot be higher than 45℃, and the water flow rate is 10T/h (it is recommended to use softened water. If the load rate is high, the cooling water temperature is It must be lower than 40℃. Use water circulation and softened water. When the temperature is lower than 0℃, the circulating water in the equipment should be discharged to avoid freezing and cracking of the pipeline.

To prevent electric shock, please ensure that the case is firmly grounded in accordance with electrical standards, and water is supplied first, and the water pressure is checked and there is no leakage. Then turn on the power and wait for the panel DC voltmeter to be above 500V before turning on the panel power switch.

Only when the equipment is used correctly can the life of the equipment become longer.