If you want to make the life of the induction heating equipment longer, it should be used correctly. Strictly implement the guidelines of first water supply and then electricity supply. Water shortage is prohibited during the operation. The quality and pressure of the cooling water inside the equipment and the sensor Necessary to reach the requirements. In order to avoid blocking the cooling pipeline, if you choose a water pump to supply water, install a filter at the water pump

Solid melting furnaces are widely used in the fields of aluminum wheels, aluminum tubes, aluminum rods, aluminum plates, aluminum stamping parts, aluminum burners, bicycle aluminum fork frames, etc., and the three technical characteristics of solid melting furnaces are also required. Three technical indicators of solid melting furnace 1. The solid melting furnace adopts A1-518/518P artificial intelligence instrument

The type of continuous tempering furnace mainly refers to the shape and size of the furnace space, the content of the extinguishing installation, the unit, the deployment, the arrangement and the arrangement of the exhaust outlet. This is a very trivial question. Whether the design of the furnace structure is proper or not has a great influence on the output, heating quality and fuel consumption indicators of light industrial furnaces

The function and working principle of mobile phone aging furnace The special aging furnace for mobile phones is used for heat treatment such as tempering of workpieces and components and quenching and aging of aluminum alloy parts. The function is similar to the quenching furnace, and it is also a periodical operation electric furnace The working principle of the aging furnace: the hardness of the aluminum alloy aging furnace is not high after quenching,

Vacuum quenching furnace is suitable for solution treatment and timely treatment of parts of large and medium-sized vacuum products. Vacuum high-pressure gas quenching furnace is a very advanced vacuum heat treatment equipment.

The working principle of the intermediate frequency fast melting furnace: Using a three-phase bridge-type fully-controlled rectifier circuit to rectify AC power into DC power, after being smoothed by a reactor, it becomes a constant DC current source, and then through a single-phase inverter bridge, the DC current is inverted to a certain frequency ( Generally 1000 to 8000 Hz) single-phase intermediate frequency current.